PARTS & ACCESSORIES
Refine Search
Bambu Lab - Hotend with Harden Steel Nozzle
For X1 and P1 Series PrintersHighlights of Various Nozzle Diameters0.2mm NozzleOptimal Print Finenes..
$22.99
Bambu Lab - Activated Carbon Filter
OverviewMelt extrusion printers will generate VOCs while printing because the heating temperature of..
$8.99
Bambu Lab - Filament Replacement Cutter (3 PCS)
OverviewThe filament can be cut to prevent the supplies from clogging when using the Bambu X1 s..
$6.99
Bambu Lab - Nozzle Wiper
OverviewThe Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. I..
$6.99
6500K White LED Strip
Combining Design and PracticalityThis 6500K white LED light is designed with the ability to be cut i..
$20.99
Bambu Lab Hardended Steel Extruder Gear Assembly
OverviewThe hardened steel extruder gear assembly is an internal component of the hardened..
$25.99
Bambu Lab - AMS Lite Filament Hub
OverviewThe AMS lite Filament Hub is a key part of reliable filament switching during mult..
$7.99
Bambu Lab - Dual-Sided Smooth PEI Plate
High Z-axis precision printingThe use of a Smooth PEI Plate contributes to improved Z-axis pre..
$49.99
Bambu Lab - Silicone Sock for Hotend
OverviewThe Silicone Sock for Hotend is made from high-quality silicone for higher temperature resis..
$9.99
Bambu Lab - Textured PEI Plate
Recommended SettingsPlease note that other slicer settings might need to be adjusted based on t..
$49.99
Bambu Lab 4-in-1 PTFE Adapter
OverviewThe Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the o..
$7.99
Bambu Lab A1 Series Hotend Kit
OverviewThe A1 Series Hotend kit has 3 hot end nozzles A 0.2, 0.4 and 0.6. Silicone Socks are also i..
$49.99
Bambu Lab P1 Ceramic Heater & Thermistor
OverviewThe ceramic heater and thermistor for Bambu Lab P1P 3D printer are combi..
$31.99
Bambu Lab Thermistor - X1 Series
OverviewThe thermistor has highly accurate temperature measurement and reliable structural design.&n..
$17.99
Bambu Lab Wireless Charger Kit
OverviewPlease note that the hardware kit does not include the 3D printed parts as shown in the main..
$43.50
Bambu Lab X1 Series Ceramic Heater
OverviewThe ceramic heater can heat the nozzle up to 300℃, which is for use with Bambu Lab comp..
$17.99
Brass M6 Nozzle 1.75mm -0.4MM (2 PACK )
This 0.4mm diameter nozzle is compatible with the standard E3D V6 hotend and can be used ..
$8.00
Brass MK8 Nozzle 1.75mm (2PK)
Two Pack of Brass MK8 1.75MM Nozzles compatible with MK8 hot ends.Ranging in sizes from 0.1mm ..
$8.00
Creality Heater Block Silicone Cover MK8/MK9 Hotend
Heater Block Silicone Cover MK8/MK9 HotendFor Creality CR-10,10S,S4,S5,Ender 3,Ender 3 Pro,Ender 5,C..
$5.95