MADE IN CANADA!!! 

Filaments Depot PLA is quality virgin PLA . Both PLA resin and colorant are food-grade material

Made in Canada, Ontario utilizing sophisticated extrusion equipment and high-tech drying technology. The filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology. Producing clean, repeatable and reproducible results.

• Made with recyclable spool and box
• Includes an extra resealable bag in the box

Print settings

• Printing Temperature : 190°C - 230°C
• Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.
• First layer usually 5°C-10°C higher than subsequent layers.
• Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.
• Cooling Fan: Highly recommended.
• Empty Spool Weight : 140 Grams 
• Gross Weight :1140-1170 Grams 
• Net Weight : 1KG 

Mechanical Properties

• Tensile modulus ISO 527-1 3500 MPa
• Tensile strength ISO 527-1 50 MPa
• Elongation at break ISO 527-1 ≤ 5%
• Charpy notched impact, 23°C ISO 179-1eA ≤ 5 kJ/m2
• Heat deflection temp, amorphous2 ISO 75-1 60°C
• Heat deflection temp, crystalline2 ISO 75-1 105°C